If you ordered at the same time as the Happymodel Mobula6 is on sale, you may have already received it.
Today, Monula6 arrived in my hand.
Happymodel Mobula6 comes in two versions with different motor Kv values: Rgular Edition (0802 19000kv) and Race Edition (0802 25000kv).
I thought everyone was expecting a review of 25,000kv, so I decided to review it.
I didn't compare both of the Mobula6, but personally I think the 25000kv motor is perfectly great.
I'll proceed with the Review.
- Happymodel Mobula6 Specs
- Happymodel Mobula6 "Unboxing"
- Happymodel Mobula6 Aircraft Check
- Check Your BetaFlight Settings
- HappyModel Mobula6 Flight Test Video
Review Happymodel Mobula6
Happymodel Mobula6 Specs
- Brand Name: Happymodel
- Model: Mobula6
- Item Name: 65mm Crazybee F4 Lite 1S Brushless Whoop FPV Racing Drone BNF
- Frsky Receiver or Flysky Receiver
- SE0802 19000KV / 25000KV Motor
- Gemfan 1219 3-Blade Propeller
- Onboard 5.8G 40CH 25mW VTX
- Runcam Nano 3 FPV Camera 800TVL
- Drone Wheelbase: 65mm
- Size: 80x80x37mm
- Weight: 20g
I'll post the photo later, but the MObula6 FC has a built-in VTX.I think this is also why the Mobula 6 is the lightest whoop.
Happymodel Mobula6 "Unboxing"
I took out the contents of the box.
- Mobula6 1S FPV Racing Drone
- 4x 1S 300mAh 30C Lipo Battery
- 1x 1S Lipo/LIHV USB Charger
- 1x Propeller Disassembly Tool
The lipo battery was a PH2.0 connector as before.
Happymodel Mobula6 Aircraft Check
The canopy used in Mobula 6 is unique compared to past hoops.In addition, something like a wire comes out from the side.
The Mobula6 flight controller has a built-in VTX and is a very interesting type.
If you want to use the Mobula6 flight controller on your own machine, you don't need to procure VTX.However, you need to be careful with the connectors that are being used.
Do you see the camera connector in Runcam nano 3?The camera side is a male connector.
At the time of writing the article, the products sold by Banggood can not be used as it is for female connectors.
After a while, I think the camera with connector will be sold as a custom part of Mobula6.
The weight is 20.0g perfect and very light.
The Mobula6 doesn't have the impression that the frame is that thin, so it's surprising that it's lighter than betAFPV's Meteor65.
Check Your BetaFlight Settings
The BetaFlight settings on Mobula6 are not like ProjectMokingBird, but the flight was comfortable with only the minimum required settings.
In addition, the BetaFlight configurator will use 10.4 from the firmware of the FC.
I flew Monula 6 in the image settings above, but there was no problem.Rather, it was very comfortable.
HappyModel Mobula6 Flight Test Video
Happymodel Mobula6 was a drone that could fly without any problem even if you chose 0802 25000kv. Rather, you may be dissatisfied with 19000kv.
As a result, if you have some experience in flying drones, 25000kv seems to be good.
The biggest question is that Mobula6 has a higher Kv value than betAFPV's Meteor65, but it is very mild to fly.It's up to you to decide which one is better, but I think you should choose Happymodel Mobula6 if you want a mild flight.